Description
Large collection of E36 parts collected during years of racing with NASA and Champcar. Car totaled and parted out, can't find an E36 coupe for reasonable price. Bought E46. Time to clean house.
M50 2.5 non-vanos, running when removed, complete long block, needs cams put back in. (removed to run S50 cams)
M50 2.8, complete running when removed 7/20/2025. Will probably strip down to long block -see engine parts below
S50 3.0, complete long block-disassembled(missing 1 cam follower tray?), scored cylinders, was running with scoring when valves bent due to misshift (no valves broke off). Extra S50 crankshaft, couple of rods and pistons.
S52 3.2, complete long block-disassembled, scored cylinders, was running with scoring when valves bent due to misshift (no valves broke off).
M50 cylinder head, has valves no cams
Can't remember which engines have oil pump shaft and sprocket upgrade? 2.8 for sure.
Probably don't have enough oil pans(OBD1/OBD2), or FWs for all of the engines.
All of the parts are in a shipping container, mostly boxed up. I soaked the engine parts and packed with oil rags. Should all be good.
Engine parts, ( currently on 2.8) OBD 1 engine harness, ECU, injectors and fuel rail, early OBD1 M50 intake manifold, cable type throttle valve, alt, starter, PS pump, headers, one piece 3" exhaust with center muffler, power pulleys (ps pump pulley damaged), lightweight flywheel with disc and pressure plate - all for 5speed.Have more in boxes. OBD2 engine harness & ecu, should have OBD1 non- vanos harness and ECU, starter, alternator, sensors, pulleys, instrument clusters, AMM, oil filter housing, and lots more good savable stuff.
Getrag 5 speed
Getrag 5speed
ZF 5speed core
Getrag 6 speed, has one leg of each rear trans mount broken off. Have the pieces to weld back on.
325is rear diff 3:91 LSD, Rogue Finned rear cover(can remove),
325is 3:91 LSD noise?
M3 LSD 3:17? LSD
Have a couple more differentials, need to see what I have.
Different differential pinion flanges somewhere, 4 bolt/6 bolt driveshaft pattern
4 or 5 driveshafts - 5 sp, 6 sp, manual, auto, ??
All parts for an auto trans to manual conversion.
Front subframe stock oe Front X brace, have two, one is bent some. Steering rack.
Rear subframerear trailing arms (some new oe)axles
Various front and rear sway bars
Front M3 steering knuckles/spindles
Front M3 brake calipers w brackets
328 rear brake calipers and brackets( use with vented rotors)
ABS ECU and hyd unit from 1992 E36 chassis
CRF sunroof replacement panel Left and right front fenders. rocker panel skirts trim Front and rear bumper covers, stock oe?
Wheels, all wheels have been used for racing and reflect that use. May have scratches, dents, and dings however all wheels balance out and can be used, or at least I did. All wheels 17"4 OE M3 style 39M 7.5 wide4 OE M3 style 39M 8.5 wide1 OE M3 style 39M 7.5 wide, like new, was the spare in the trunk of a car. 6 OE 95 M3 Motorsport, the wheels with motorsport imprinted. I think all are the same width?
2 Corbeau race seats
All of the parts listed are from memory. Sure to be things I forgot.
Right now I'm seeing how much interest there is for any or all of this. I know what this is worth if someone needs it. My preference is to sell it as a package. Should there be more interest in selling part by part, I'll do that. Post, PM, email, or call with questions, offers, or comments. Frequently out of town so I may not be able to answer specific questions if it requires looking at the parts until I'm able to do so. Parts are located in Deland Florida.
