I'm thinking about getting a full set of mounted run flat snow tires (Blizzak LM-25) to change out in the winter and then to change back to the Turanza's in the spring. I want to retain the TPM system functionality, so each wheel will get a sensor but I have to reset the system when I mount the snows and vice-versa. Has anyone had any experience resetting the TPM system after mounting wheels with different/new sensors? Is this a dealer-only thing?
what's the year and model of your BMW? I have access to Alldata which has given me the reset procedure for other cars, it might have it for BMW
u can easily reset TPMS via iDrive. if you don't have iDrive, chk over on e90post and you should be able to find an answer there
I couldn't find the relearn procedure on Alldata, they tend to not have much info on newer, European cars, I'd say a forum is your best bet
tiFreak, I appreciate the effort. Being a 1st time BMW owner, I had no idea there was such a support community out on the 'net. I'll have to get used to saying "bimmer" rather than "beemer", though. Thanks again. Regards, Ray.