Hello there and welcome to the BMW Car Club of America.

If you are a BMW CCA member, please log in and introduce yourself in our Member Introductions section.

Oil Filter Housing Cap O-Ring Individual PNs?

Discussion in 'DIY (Do-It-Yourself)' started by Yangorang, Feb 11, 2018.

    • Member

    Yangorang

    Post Count: 31
    Likes Received:3
    • Member
    • Staff

    steven s

    Post Count: 2,379
    Likes Received:93
    It wasn't stuck inside the filter? Or maybe it fell out?
    • Member

    Yangorang

    Post Count: 31
    Likes Received:3
    I'm just looking for the individual part numbers because they'll eventually wear out. The stainless steel oil filter part just gets cleaned and reused forever.
    • Member

    MGarrison

    Post Count: 3,604
    Likes Received:216
    • Member
    • Staff

    steven s

    Post Count: 2,379
    Likes Received:93
    Also, if that metal washer is a crush washer, they should not be reused.
    • Member

    Yangorang

    Post Count: 31
    Likes Received:3
    K&P ended up giving me the exact details of where they buy the o-rings they include with the stainless steel filter and the dimensions. Both are Buna-N 70D:
    The larger o-ring is 3.5mm CS x 80mm ID
    The smaller o-ring is 2.5mm CS x 7mm ID
    MGarrison likes this.

Share This Page