Hello there and welcome to the BMW Car Club of America.

If you are a BMW CCA member, please log in and introduce yourself in our Member Introductions section.

Active Steering OBD error CE9C

Discussion in 'E90/E91/E92/E93 (2006-2011)' started by sbfreeman, Oct 29, 2013.

    • Member

    sbfreeman

    Post Count: 6
    Likes Received:0
    Hi:
    My car is signaling it needs maintenance. I ran an OBD reading so I would be prepared to put comments in the right context. It generated an error code I cannot find:
    CE9C Message (Status DSC, ID=19E) from DSC PT-CAN
    If this is available somewhere and I missed it please point me in the right direction. If it's not available but someone could add insight into it's meaning I would appreciate hearing for you.
    Regards & Thanks in advance
    Scott
    • Member
    • Technical Service Advisor

    charlson89

    Post Count: 1,099
    Likes Received:54
    Are you having any issues with the vehicle besides the service light being on?
    • Member

    sbfreeman

    Post Count: 6
    Likes Received:0
    No. The car does not have issues and the service light was triggered because it is time to change the brake fluid. I am tempted to just reset the OBD reading.
    • Member
    • Technical Service Advisor

    charlson89

    Post Count: 1,099
    Likes Received:54
    That fault is most likely from a incorrect message sent from one module to another over the communication lines. This is most likely just a one time fault and can be cleared out.
    • Member

    sbfreeman

    Post Count: 6
    Likes Received:0
    • Member
    • Technical Service Advisor

    Terry Sayther

    Post Count: 107
    Likes Received:14
    I agree. Clear the fault and see if it comes back. Hopefully it will not.

Share This Page