Hello there and welcome to the BMW Car Club of America.

If you are a BMW CCA member, please log in and introduce yourself in our Member Introductions section.

Turn Signal/High and Lowbeam switch.

Discussion in 'E46 (1999-2006)' started by Raychelsdad, Jul 10, 2010.

    Raychelsdad guest

    Post Count: 1
    Likes Received:0
    I was driving my 2002 325i and the high beam switch would not switch my headlights. I then noticed my Turn signals also do not work. My fog lights do not come on. My headlight are on automatic even though i did not set them that way. I thought maybe the turn signal switch went bad bud that still should not control my headlights or fog lights. Is there a fuse I should check or control module somewhere. Any help or suggestions would be appreciated. Post Script; I took my vehicle to a good non dealer BMW mechanic. He pulled the module which is behind the headlight switch on the dash. He checked it and found some corrosion on the connections. He cleaned them with small wire brush and contact cleaner and they worked fine. The dealer wanted $395 dollars for this module. The mechanic said it was probably caused by condensation from the ac unit. It was and easy fix.Thanks RB

Share This Page