Hello there and welcome to the BMW Car Club of America.

If you are a BMW CCA member, please log in and introduce yourself in our Member Introductions section.

I channeled the power of stupid on my E30 and need help.

Discussion in 'DIY (Do-It-Yourself)' started by travis.jeremiah, Jan 30, 2020.

    • Member


    Post Count: 1
    Likes Received:0
    Hello! I have an 1991 318is that has a junk motor. during the removal process, something (exhaustion) compelled me to pickup my bolt cutter to deal with some of the things holding it. That was a bad idea.

    So here I am with a bunch of cut wires and no brain trying to figure it out. I know they go under the driver dash but that's about it. Anyone able to help out? I believe it was the wiring for the front clip, but I'm terrible with wiring.

    pics here : https://drive.google.com/drive/folders/1NPxL_6PzlC2gO31iYhiDtNqg415bc--W?usp=sharing
    • Member


    Post Count: 67
    Likes Received:15
    Can you easily get to the other half of the wires? If so, you'' just have to match the colors on both sides and solder in a splice. Make sure you slide some heat shrink on one end prior to soldering them back together. Good luck

Share This Page