Hello there and welcome to the BMW Car Club of America.

If you are a BMW CCA member, please log in and introduce yourself in our Member Introductions section.

CX Racing Radiator Brackets (3) ?

Discussion in 'DIY (Do-It-Yourself)' started by kevinheap, Jan 21, 2009.

    kevinheap guest

    Post Count: 38
    Likes Received:0
    Got my new CX Racing Alum Radiator yesterday and noticed it only has three of the ell shaped brackets that the shroud slides up into. It is missing the one above the lower hose flange. Should this be a concern? I could try and fabricate something onto the hose clamp maybe. I sent an email message but these take a while and I need this baby on the road.

    It also has threaded bores to affix the shroud at the top where the plastic rivets were on the stock radiator. I suppose I will just go through all the different thread combos one by one until I find the right one, if they dont call back with the info. I don't have a thread gauge.

Share This Page