When the door is opened with the window up, it automatically lowers about 1/2" then rises back to the full up position to seal properly. However, this has stopped happening on the driver's side door. It drops down the 1/2" but does not raise back up. Has anyone else experienced this?
Steve; Thanks for the link. I tried that and also tried lowering and raising the top, but to no avail. Sometimes if works right, but usually not, so I guess I have to see the dealer.
Try these out. There are four different procedures I have found. The fourth one worked on my MC. http://www.shipkiller.com/Window_Initialization_Procedures.html
