Hello there and welcome to the BMW Car Club of America.

If you are a BMW CCA member, please log in and introduce yourself in our Member Introductions section.

1998 Z3 brake drag

Discussion in 'E36/7 Z3 (1996-2002)' started by RickQuinn, Jul 31, 2009.

Thread Status:
Not open for further replies.
    • Member

    RickQuinn

    Post Count: 13
    Likes Received:1
    I have had a periodic problem with my right front brake caliper sticking. Pressure remains on the pads causing the rotor to heat up. This happens intermittently. I have changed the caliper, rotor, pads, guide pins, and flex hoses. And the problem persists. My next thought is that the problem is being caused by the ABS system. However there are no trouble codes. Help!
    • Member

    CRKrieger

    Post Count: 1,616
    Likes Received:20
    Master cylinder.
    • Member

    lcjhnsn

    Post Count: 462
    Likes Received:6
    My 98 M3 did that, but is was a stuck caliper piston
    • Member

    RickQuinn

    Post Count: 13
    Likes Received:1
    Brake drag

    If it were the master cylinder wouldn't the left rear brake also drag? This has not occured.
Thread Status:
Not open for further replies.

Share This Page