Thanks. I'll get my indy to do it.
I recently install a 35w 6000k hid kit. I am getting low beam out error message and lights stay off. If I turn off the engine and restart the error...
Problem solved. Bad ground terminal at the light assembly.
According to my year model there are no fuses associated with the lcm but if I am wrong please let me know what fuse number is associated with the...
Was in the process of installing hid on the right side if my e38 when I accidentally crossed the wires going to the high beam hid. Getting chk errors...
Steering feedback Thanks for the advice. Since the car was bought with 149K and it was 10 years old when I bought it, I did not have the...
Can anyone please help with this issue. I replaced my tie rod ends and drag link (Meyle) lately and now I get a little more road feedback in my...
Thanks all for your help. I did check the tirerack.com for fitment suggestions but due to the diameter difference it was not included in their...
I cannot fathom that a tread width difference of .29 inches (9.35 vs 9.64) would make any dramatic difference in mileage. The overall diameter is...
Finally purchased a set of style 118's from a 2008 650I. The wheels fit perfectly but I need some advice on purchase of tires. I was looking at...
I have a set of 18X8 style 37 wheels with 13mm offset and 72,56 bore. Will style 118 wheels fit. Thanks
Metal water pump pulley? The ribbed water pump pulley on my E38 is plastic and not metal. Does anybody make a metal replacement ribbed pulley?
Water pump pulley Let me explain. The ribbed water pump pulley on my E38 is plastic and not metal. Does anybody make a metal replacement ribbed...
Need a good indy in the Richmond/Midlothian Va area to do some work. 1. Replace rear diff seal and gasket 2. Replace rear passenger window trim...
Does anybody make a replacment metal water pump pulley for the E38 to replace the failure prone plastic pulley?
Membership renewal Cabender42 - send a note to Steven S. He was able to increase my membership to 3 years without any problems and may be able to...
Renewal I would like to take the 3 years for $112.00. Please amend my renewal order to reflect this change. Also can I take advantage of the...
Membership renewal I just renewed my membership for an additional year but you gave me no option to renew for more than 1 year. How can I renew for...
Been there done that no luck.
Nice site but prices are a little too steep for me. Thanks anyway. Still looking for a reasonable priced wheel that I can refinish myself.
Separate names with a comma.
