thanks and part search The advice much appreciated. I'd like to go with a dual side draft carb set up and a cam, but hope to find good used parts....
As a new owner of an already not stock/correct 1972 02, I'm very interested in improving the power of this car. It already has been rebuilt, bored...
looking for advice on where to purchase and installation process of polycarb rear side and rear to replace the glass on an E30 track rat. Especially...
Any advice on choosing racing seats for an 89 E30; this is a D.E. event vehicle only, rarely street driven, budget minded, but decent quality...
thanks Thanks for the input, much appreciated. I'll probably drop the rear sub frame next winter to do bushings and all the things you mentioned.
89 E30 with Eibach springs, sway bars, Bilsteins for use at track DE events and now have added a camber plate adjuster for the front end struts. Any...
Regarding the somewhat common problem of the 5th and reverse position detents hanging up or sticking ; Has anyone ever tried drilling a small hole in...
what solved your shifter problem; sounds like the same thing as mine.
You may have air in the system; have you bled the cooling system? Usually a venting screw on the thermostat housing. Although some things on a BMW...
In a 98 M3 manual "lifetime" tranny fluid; would I be better to go with Redline MTL or the auto trans. fluid. I have recently been having an issue...
pull off the other panel to see how it's done. probably a broken cable retaining clip. may or may not be able to do a home made repair. on front...
maybe As a happy convertible owner of the same year, I can tell you that it ia a wonderful car with the top down. Top up they have their rattles,...
I have a thread posted under the E36 3series group if anyone would care to respond. At my wits end on a 98 M3 that refuses to have a proper brake...
Seems I have a rare situation that no one can find the cause. Low brake pedal in a 98 M3. Has 4 new rotors, rebuilt front calipers, all new pads,...
A while back I sought advice on speedo and tach that were off and on as they saw fit, a temp. guage that did not work at all. New senders for speedo...
My 89 325i has a tach that usually works, but sporadically doesn't; a speedo that usually doesn't, but sometimes does. I have tried other used...
I have officially given up on getting the coolant temp gauge to work on a 92 325i engine. There is a problem in the wiring and it's just not worth...
Thanks, I have now done that, but seem to have an addt'l wire or gauge problem. I'll get to the bottom of it eventually. The other thing that still...
92 2.5 M50 in my 89 E30(swap job done by some one before me); can't get a temp. gauge read; others told me to use the original one wire sender from...
E30 M50 swap tach solved Tried a different tach in the same cluster and it works. Anyone have any ideas if the 1st tach is likely junk or some kind...
Separate names with a comma.