I recently installed a new (to me) set of wheels: BBS RC's. They're much more time-consuming to clean and wax than my style 30's. However, I did...
Sweet ride-I love the interior color scheme!
The car was sold, but it was a non-running car in as-is condition. It was also not a true B7, it just had the B7 motor.
Chuck-thanks for the info. The offer seemed too good to be true; and after some investigation it turns out it was. It popped up on my local...
Like the title says, can anyone give me a link to some technical information/articles on the 635csi (1983-euro import), fitted with an Alpina...
I would stress the use of microfiber when applying and removing product from the wheels. It may seem obvious, but it wasn't to me (unfortunately)....
Thanks. I was leaning towards S-K, and your recommendation sealed the deal. I just received it in the mail today; it's a very nice tool....
The plastic lever that controls the direction of rotation snapped off. I've also used Craftsman for years without incident. The first time it...
I just had a Craftsman teardrop-type ratchet break on me twice in as many days. Sears replaced the tool without a fuss, but I'm looking to upgrade...
I'm also a big fan of Wheel Wax. If your wheels have an intricate spoke pattern it would be worthwhile to apply a coat of sealant first, then Wheel...
That's what I was hoping. If I have to use the jack stands I will. I just wasn't sure if the sway bars were under pressure with the road wheels on...
I'll be installing new swaybars(front and rear) in my 96 328 soon, and I can't seem to find a detailed DIY online, and the Bentley manual only gives...
I'll have to give that a shot. I've used 303 to spruce up the engine bay, and it works great.
Judging by the previous few posts, there seems to have been some confusion. I was removing the filler plug first. When it wouldn't yield, I...
..back from the dead I finally got around to putting in the Synchromax and am very pleased with it. The shifting is much smoother. Also,...
I have a palm-sized orange cutting pad that I use (by hand) with Menzerna Final Polish for the headlight lenses on my e36. It looks as good or a...
Wouldn't the factor here be distance, not time? As in; you need x miles of travel to achieve a speed of 150mph. Over that distance you need to...
Word on some other boards is that the Jim Contorfi Shark Injector is more agressive for the same price as Dinan. However, having exclusively Dinan...
autogeek.net is my go-to for supplies. They're a big operation, and have always shipped promptly for me. Other online sites are autopia.org and...
Here's a link to an article on replacing the wheel on an e36:...
Separate names with a comma.
