I had the DW's on my e36 and I loved them. Good tread wear, quite, and performed well. No complaints on my end.
Some E83's have a drain on the radiator, and some do not. For the one's that do not have the drain, you have to remove the lower radiator hose....
How often are you adding coolant?
Did you replace the brakes? If so did you put a new sensor in with them?
This happens alot. The coils on this cars fail. If you have a code reader, findout which cylinder has the misfire. Then move the coils around and...
We use the Graf water pumps here at the shop.
I couldn't tell you the amount of those grounds that I have fixed on those e46's. But I also have seen both bulbs go out before. Not unheard...
The service engine light goes off, but the code is stored. You should really scan the car and see what the code is. That will steer you in the...
I haven't heard anything bad about the Meyle bushings. We have just had good luck with the Boge, so we stick with it. We use Lemforder alot...
Out of all the bushing that we have used at the shop, the Boge one's have lasted the longest. They come already mounted in the metal bracket.
I know one thing the E46 M's get over the other 3's is a valve adjustment on the inspection services. I would have to look for the exact time's but...
All the time. Commen failure part.
90k is around when the crank vents fail. We check the crank case pressures at the shop with a magnehelic gauge. If I remember correctly, the...
There are companies that specify in wheels. I used a place called NUWheel out here in Tucson AZ. They charge 125 a wheel to straighten and...
So I sent my wheels out to be refinished since they were starting to look bad. Got new tires to while I was at it. Dunlop Direzza's on all 4...
Failing diffs will start to hum and get quite loud. You can also get alot of play in gears, which will also cause an audible clunk. I have over...
Yes, why do you think that the diff is shot?
It's probably an ABS problem. When the ABS fails, it takes the Traction control system down also. It could something as simple as a sensor, but...
Looks good. I just go the same tires for my contour m3 rims. Sent them out to be refinished. Are those tires still holding up well, performance...
We use the Brembo rotors at our shop also. There very good, and you shouldn't have any problems with them. I have that photo of that M3 as my pc...
Separate names with a comma.
