Yes, you have to remove the whole bumper assembly(front or rear for that matter) to R&R the cover. But it's EASY! First remove all the "push pin"...
Answered this in the DIY section. But take a look here: http://www.bimmerfest.com/forums/showthread.php?t=147492
Which weather stripping? Around what openings? I have a 99 e39 and the few pieces that I have replaced have been relatively inexpensive and fairly...
Yes, it is replaceable and despite what the dealer will tell you, WITHOUT removing and replacing the windshield or rear window. Go here...
Permanent. Haven't touched them since.
OK. You asked for a long shot. I too went through most of the steps you detailed with only temporary results. My final solution taken several...
Since the subject of this post is the parts catalog at www.realoem.com, why don't you go look the part number up there? It's quite interesting and...
Hate to disagree with you "BornMostWanted". There are Dealer Technicians and then there are Dealer Technicians. The one time I did take my 528 to...
IMO if it's wearing the tires nicely, tracks straight down the road, and handles well, leave it alone. If it ain't broke, don't fix it. (Except for...
I hate to burst your bubble but only the toe is adjustable on the front end of an E39. Caster and Camber are fixed. That being said: Are you sure...
Hard to say but here is a way you MAY be able to research it out. Write down the last 7 digits of your VIN. Go to www.realoem.com and look up the...
It's supposed to be done at least every two or three years. There have been many DIY writeups on many of the BMW forums. Here are a few. Just use...
Installed Axxis Deluxe pads on new Brembo rotors about a month ago. Bedded them in with a dozen 80 to 20 mph "panic" slow downs. No problems at...
Separate names with a comma.
