I just replaced my shut off valve due to an engine light and the code it was posting. I'm wondering if I got a bad valve or if something else could...
The locking mechanism that releases the front seat back (passenger side) so that it can move forward and someone can access the back seat, has...
Once again, thanks for the leads. I do appreciate it.
I'm trying to locate the left (51 13 1 977 681) and the right (51 13 1 977 682) roof ledge trim for my 97 M3 coupe. I've placed and order with the...
Thanks for all of the input, your comments and suggestions were very helpful. I installed the new SS brake lines but was very careful to minimize any...
Many thanks for the information. Steel brake lines are included in this brake rebuild but It sounds like if I minimizing getting any air in the lines...
I'm ready to rebuild the brakes on my 97 M3 that's equipped with ABS and ASC. The Bentley manual warns readers (and DIY's) that this should be done...
I have a 1997 M3 (12/96 production date, S52) and I'm trying to replace the bowden cable to my cruise control. I ordered part no. 65 71 2 228 748...
No click. Its like there is no power to the solenoid or starter but the battery is strong. My thoughts that it may be a bad EWS module or relay. It...
Thanks for the information on the master cylinder installation and bleeding process, but since I have your interest I have another little dilemma. On...
The brakes bled fine with no issues. I used the power bleeder and the brakes feel firm and the car stops great! Thanks to all that responded, your...
Just curious as to how you were able to bleed the system. My 97 M3 requires a computer to tell the pressure sensors on the ABS and AST systems to...
Thanks to all, I do appreciate your time to respond. This helps a lot. Best regards, ---- Mike
Does anyone know how to bleed the brakes on the E36 M3 with ABS and AST. I'm told that I have to take it to the dealer so they can set a code for...
Hi Mike here from Florida. A friend gave me two new cooling hoses for his E39 that he has since parted with. I have the part numbers still on the...
Separate names with a comma.
