Couldn't find the live drawing anywhere on the site or on youtube...
David, You're welcome! I see you have a 2010 E63 M6 with a 6MT. That is an extremely rare car as only 17 2010 E63 M6 6MT were imported and only 18...
I'm sure you've found by now that the ET25 10" width wheel works fine all around on the E9x M3 with the proper tire size. I have a set of Apex 10x18...
The easiest way is to buy one of the available BMW software tools online along with the OBDII cable. Then you can simply use it to run the proper...
Also, at 100k on your S85, I would strongly suggest you change the rod bearings...see numerous threads on the M5/M6board on the subject. You will...
If you want to read about the details of the actuators and its failure points, see this thread from the M5baord:...
Like most all modern BMWs, your M6 already has a cold air intake including that it's inlet is in the high static pressure zone behind the grill in...
Rob, I enjoyed the article on your new-to-you Bavaria! It's been 33 years since I put Suspension Techniques sway bars on my Bavaria, but I'm...
BCables sells a complete package of s/w tools including INPA: www.bcables.com It takes a just a few minutes of time using a laptop with INPA...
It's a piece of cake to change brakes just like any other car, but on one with CBS sensors like the E90s, you HAVE to buy new sensors unlike the old...
Wow, great pictures! Thanks. I don't think anyone here would object to 20-30 detailed pictures of the E30 and that red E28 M5 next to it! (not to...
Thanks for the pictures link...just about to look through them as I've been wondering the same thing about picture links for last week. What are the...
Any updates? Are there drawings Wed and Thur nights and then the CCA M3 on Friday night?
Here's some S65 fun from a couple of months ago to keep your thoughts going! :) [media]
Watching that video of the Michelin coupon drawing yesterday reminded me of being at O'fest 2005 for the raffle drawings. I think a total of three...
Since that is pretty much the torque spec that BMW calls out in the TIS for every BMW I've ever owned?
Both local dealers in my area, Leith BMW and Performance BMW, use a pricing algorithm that marks up MSRP by a declining percentage as the MSRP...
Bring some Optimum ONR and bring a collapsible bucket, microfiber towels, etc. It does an outstanding job with no scratching. Then you can wash...
Wow, more than 100% markup from the MSRP. I bet they give you a "10% BMW CCA discount" though, right? ;) Let's see: from BMW Morristown online...
MSRP is $4.09, BMW Morristown online parts site discounts them to $2.39. Good idea to replace them as you can't be sure if they were torqued beyond...
Separate names with a comma.
