Hello there and welcome to the BMW Car Club of America.

If you are a BMW CCA member, please log in and introduce yourself in our Member Introductions section.

Expansion tank

Discussion in 'DIY (Do-It-Yourself)' started by slinky66, May 11, 2009.

    slinky66 guest

    Post Count: 37
    Likes Received:0
    When I went to replace the top radiator hose, about 3/8 inch of the plastic end of the expansion tank broke off and was attacted to the end of the radiator hose. The part that broke off is clearly part of the expansion tank; are those 2 separate parts or are they one part? On my radiator, the expansion tank appears to be attached to the radiator, on the driver's side.Need to order some parts:)
    • Member
    • Technical Service Advisor

    mooseheadm5

    Post Count: 1,880
    Likes Received:16

    slinky66 guest

    Post Count: 37
    Likes Received:0
    Good advice. Thanks

    slinky66 guest

    Post Count: 37
    Likes Received:0
    Paul,

    I decided to replace all the parts on the diagram you sent. Where would you suggest going for these parts? I usually use oembimmerparts.com but have not been able to contact them.

    Thanks
    • Member
    • Technical Service Advisor

    mooseheadm5

    Post Count: 1,880
    Likes Received:16
    getbmwparts.com (Tischer BMW, they are a dealer for when you can't find aftermarket)
    autohausaz.com
    pelicanparts.com

Share This Page