Hello there and welcome to the BMW Car Club of America.

If you are a BMW CCA member, please log in and introduce yourself in our Member Introductions section.

Trunk Lid Wiring Harness

Discussion in 'E60 (2004-2010)' started by bimblaze, Sep 4, 2019.

    • Member

    bimblaze

    Post Count: 10
    Likes Received:0
    My trunk lid switch inside the car located in driver footwell, the Trunk lid switch and my left license plate bulb, along with a dash message that says I have a bulb out. All have stopped working. I open the trunk area by the battery and pulled out the harness in side the trunk lid left hinge and found a bunch of frayed and severed wires. I bought some shrink wrap and fixed all the wires. Everything works except the left license plate bulb and the dash I Drive message is still there. Has anyone had this same issue and has resolved it?
    • Member

    charlson89

    Post Count: 2,416
    Likes Received:133
    Have you checked to make sure you are getting power to that plate bulb holder with the lights on? If not they you still may have a broken wire some where. If you do have power check the bulb holder for issues.

Share This Page